Last updated on January 7th, 2020 at 05:23 pm
If you are trying to avoid plumber emergencies and are looking for an efficient garbage disposal system that delivers what it claims, do give Moen GXS75C a look. The high speed and continuous grinding can break down hard food scraps in no time. Thus, you won’t have to worry about clogged drain pipes with the Moen GXS75C. Here is the Moen GXS75C review to help you make your decision.
Note: This site is reader-supported and we earn commissions if you purchase products from retailers after clicking on a link from our site.
Features of Moen GXS75C
The Moen GXS75C is, without doubt, among the best garbage disposal units out there. It is also a customer favorite. With a high horsepower and a compact design, this highly efficient garbage disposal unit can grind even the hardest foods scraps in no time. The reduced noise is another feature to laud.
These are some of the main features we will discuss in our Moen GXS75C review:
Size and Power
Featuring ¾ horsepower, the GXS75C offers powerful grinding and high speed with reduced jamming. It tackles even the toughest scraps effectively and without too much noise. Its performance is unmatched, and the perfect size makes it easy to place under the sink.
Although even the most high-end and quiet garbage disposal unit will have at least some noise, the GXS75C offers the minimum level of noise. The incorporated Soundshield has been designed to provide enhanced insulation. You will hardly notice this unit operating while you work in the kitchen.
The disposal unit weighs around 7.8 pounds, and the size makes it easy to fit under the sink. It comes with a pre-installed power cord that saves you the trouble and cost of buying a separate cord. The only items needed to install it are plumber’s paste and a wrench. The Universal Xpress Mount offers three-bolt mounting assemblies, which is another plus for convenient installation. All you need to do is position the disposal unit, twist it and lock it in place. The lightweight and compact design also free up space under the sink.
Powered by a high-speed vortex motor and a speed of 2700 RPM, the GXS75C finely grinds hard food scraps and reduces jams. The continuous grinding will breakdown everyday food scraps, and the permanent magnet motor will work at full speed once the power is on.
The GXS75C comes with a 5-year warranty, which is another amazing feature of this product. It covers all parts and guarantees that the product will contain no defects. All parts can be replaced in the 5-year time period without any cost.
- Grinding speed: 2700 RPM
- ¾ horsepower
- Weight:13.2 pounds
- Grinding material is stainless steel
- Drain connection size is 1-½ inches
- Dishwasher connection size 7/8 inches
- Max sink thickness is ½ inches
- 3-bolt mounting assemblies
- Product dimensions:5.4 x 5.4 x 13.4 inches
- 5-year warranty and in-home service
- Color: Black
Pros and Cons
Listed below are some of the positive and negative aspects that we uncovered in our Moen GXS75C review, which will help you make a purchase you don’t regret.
|Featuring three-bolt mount assemblies, installing the GXS75C garbage disposal is a breeze||A little louder than claimed when operating|
|The pre-installed power cord saves time and cost of purchasing a separate cord||May not work with certain food scraps|
|It is compatible with septic tanks|
|The Soundshield feature acts as insulation and effectively reduces noise to a minimum|
|The garbage disposal unit is compatible with 110V outlets|
|A high-speed magnet motor of 2700 RPM does its job quite well|
|The lightweight design makes it easy to install under the sink and does not take up too much space. It can also be placed on countertops|
|The stainless-steel components for grinding offer durability and a fine grind|
|The splash guards are removable and offer easy cleaning|
|The plug lid of the disposal is in an appealing chrome finish, unlike other units which feature a rubber finish|
|It comes with a 5-year warranty and in-home service|
|It is reasonably priced|
How to Install the GXS75C
A garbage disposal system can be installed with the help of a professional or by yourself. The GXS75C has a compact design that can be easily installed by yourself following a few essential steps. We will be covering this in our Moen GXS75C review.
Here are some of the tools that would be required to install the unit:
- Plumber’s putty
When looking to install a garbage disposal unit, make sure to follow these steps for an easy and convenient installation. The following steps are quite general and can be followed while installing most garbage disposal units.
1. Analyze Your Need
You need to first analyze whether a new drain assembly is needed. In case you are replacing an old model with a new one, you could use the old assembly. However, if you want to replace the previous drain assembly as well, you would be required to get rid of it and clean the sink completely. Thorough cleaning of the sink is important. Once it’s dry, apply plumber’s putty around the ring and press until it fits well. You can now place the new assembly in the sink.
2. Take Off the Mounting Assembly
Turn the lower ring in the clockwise direction to take out the sink flange. The screwdriver can then be used to loosen the screws on the upper ring. Once they are loosened, the snap ring can be removed. You may now remove the backup flange and the fiber gasket from the sink flange.
3. Reassemble the Mounting Assembly
Now is the time to start working under the sink. The mounting assembly will now be reassembled by placing the fiber gasket, backup flange and mounting ring onto the sink flange in the order mentioned. Now, secure the snap ring back in place and make sure all components stay in place. Finally, tighten all the screws securely.
4. Install the Discharge Elbow
Slide the rubber gasket onto the discharge elbow. Locate the mounting flange and carefully slide it on top of the discharge elbow. Attach the elbow to the unit and into the holes by using the screws present on both sides.
5. Connect the Unit
In the end, you have to align the discharge elbow and the piping. Raise the disposal unit to the mounting ring. Now, align the lower mounting ring with the ramps and turn it clockwise until it’s completely tight. Make sure to tighten the connectors using a wrench.
The garbage disposal unit is now secured and installed. Before turning on the power, though, make sure to thoroughly check for loose seals and leaks.
Moen GXS75C Buying Guide
Here are a few features to consider when buying a garbage disposal unit.
1. Grinding Power
The grinding power of the unit will help you determine its durability and performance. Spending more on a quality product will leave little room for regrets later. At the minimum, you can consider buying a 1/3 horsepower unit. It would be smart to invest in a disposer that yields ½ horsepower and even better is the one that delivers 1 horsepower.
Models with low power will not be as effective, especially when it comes to grinding hard food scraps, and are most likely to clog pipes. Thus, try to buy a model that offers high power as such models contain various grinding stages and can properly ground both hard and soft scraps such as chicken bones, corn cobs, and coffee beans.
Noise is another thing to consider when purchasing a garbage disposal unit. When working in the kitchen, a noisy unit can be a nuisance. The heavier and larger the unit, the quieter it will operate. However, you may need to make sure that the unit fits under the sink.
Manufacturers have tried to work on this feature and eliminate noise completely, but even the best garbage disposal unit will make at least some noise. Stainless steel disposers can make quite the noise under the sink, but they have the best blades that can effectively cut through hard food scraps. Thus, there will be a tradeoff here and you will need to prioritize your requirements.
The garbage disposal unit comes in either batch-feed or continuous-feed models.
In case of batch-feed, a stopper is required to cover the sink drain before the unit can be operated. This helps prevent unnecessary items from falling into the disposal when it’s in use. The batch-feed models are generally more expensive but offer reduced noise.
In case of continuous-feed, a wall-mounted switch is needed to activate the disposals. The noise is suppressed by using a rubber shield, which is placed in the sink opening.
Depending on your requirements, you can choose either.
4. Anti-Jamming Feature
In case the pipes get clogged, the disposal unit may stop working altogether in the future. The anti-jamming feature will keep the unit functioning and reduce disposal jams. In some low-priced models, the anti-jamming feature is manual, whereas high-end models have automatic options.
You can get an automatic anti-jamming unit to save the time and hassle of doing it manually. However, if you are on a budget, you will have to consider putting in more effort to unclog the pipes.
The high-end models offer warranty for mechanical defects or corrosion along with replacement coverage. Look for a model that may offer a lifetime coverage on parts and replacement.
The warranty can range from 1 to 10 years, but it should be noted that a longer warranty does not necessarily mean better performance or longer life. Try to get a disposal unit that offers in-home service in case of defect or any other issues with the unit.
A garbage disposal unit is quite handy, especially if you are trying to get rid of hard food scraps, and the GXS75C does the job like no other. This reasonably priced garbage disposal unit offers reduced jamming and minimum noise during operation. There’s no need to worry about clogged drain pipes and plumbing costs. We hope our Moen GXS75C review helped you make a decision!